New Arrivals/Restock

Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG2 shotgun microphone. With low handling noise, the ability to endure loud sound sources before distortion, and support for battery or phantom power, the NTG2 offers a versatile, cost-effective solution for recording clean dialogue and sound effects.

The NTG2's elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG2 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter. The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.

AU-3762C3DD

Quality Sound Capture
The combination of the NTG2's 11" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

Battery or Phantom Powered
Thanks to its 3-pin XLR output and operability with 48V phantom power or a single AA battery, the NTG2 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on cameras and camcorders.

Ideal for Boompole Mounting
The NTG2 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG2 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

Windscreen Minimizes Wind Noise
The NTG2 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

Features

• For Indie Films, TV & Documentaries
• AA Battery or Phantom Powered
• Selectable 80 Hz Low-Cut Filter
• Low Handling Noise
• High Maximum SPL Before Distortion
• Slight Presence Boost
• Windscreen Reduces Wind Noise
• Lightweight Metal Housing

Specifications

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Line Gradient
Capsule	Condenser
Diaphragm	0.5" / 12.70 mm
Polar Pattern	Supercardioid
Orientation	End Address
Circuitry	Solid-State (JFET)
Pad	None
High-Pass Filter	80 Hz, 12 dB/Octave
Tone Adjustment	None
Gain Adjustment	None
Indicators	None
On-Board Controls	High-Pass Filter
Windscreen	Foam (Included)
Frequency Range	20 Hz to 20 kHz
Maximum SPL	131 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection	14 dB at 60° 16 dB at 120° 12 dB at 180°
Impedance	250 Ohms (Phantom Power) 350 Ohms (Battery Power)
Sensitivity	-36 dBV/Pa at 1 kHz
Output Level	6.9 mV (Max)
Dynamic Range	113 dB
Signal-to-Noise Ratio	76 dB A-Weighted (1 kHz)
Equivalent Noise Level	18 dB A-Weighted
Output Connectors (Analog)	1 x XLR 3-Pin
Headphone Connector	None
Operating Voltage	48 V (Phantom Power) 1.5 V (Battery Power)
Operating Current Consumption	2 mA (Phantom Power) 0.18 mA (Battery Power)
Battery Type	1 x AA (Not Included)
Color	Black
Mounting	3/8"-16 Female, 5/8"-27 Female, Mic Clip/Stand Adapter (with Included Hardware)
Included Case	Soft Case
Construction Material	Aluminum
Dimensions	ø: 0.87 x L: 11.02" / ø: 22 x L: 280 mm
Weight	5.68 oz / 161 g (Microphone)
Package Weight	1.145 lb
Box Dimensions (LxWxH)	13.05 x 6.1 x 2.3"

What's Included

1 x Rode NTG2 Shotgun Microphone
1 x Rode RM5 Stand Mount for the NT5 Microphone
1 x Rode WSVM Shotgun Wind Screen
1 x Padded Zip Pouch