Sika 112729 Pro-Select AnchorFix-1 Anchoring Adhesive, 2-Component, 10.1 Oz

Solvent- and styrene free based two part polyester anchoring adhesive. The two parts found within the single cartridge are mixed in one action through the static mixing nozzle. Can Be used at low temperatures.

• 10.1 Oz
• Fast setting
• Adhesive anchoring system for threaded & reinforcing bars in un cracked concrete
• Used to anchor bolts, rebar, dowels, pins, etc.
• No mixing is required as the 2 components automatically mix within the static mixing nozzle.

Use:

• As a fast curing anchoring adhesive for all grades of: rebars / reinforcing steel - thread rods - bold and special fastening systems - concrete - hollow and solid masonry. Prior to any application, the suitability of the sika anchorfix adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: hard natural stone - solid rock.

Advantages:

• Fast setting
• Fast curing
• Standard guns can be used
• Can be used at low temperatures
• High load capacity
• Non-sag
• Even overhead
• Styrene-free
• Low odour
• Low wastage.